Services
Everything your outdoor space needs.
New decks, resurfacing, refinishing, pergolas, fences and patios — designed together, built by one accountable team.
01 — Typically 1–3 weeks on site
New Deck Construction
From a simple ground-level platform to multi-level decks with built-in seating and lighting, we design the layout, engineer the framing and build it to last — permits and inspections included.
Designed for your yard
Layouts shaped around sun, views, slopes and how you'll use the space.
Built on solid framing
Properly sized footings, joists and hardware — the part you don't see matters most.
Your choice of materials
Composite, PVC or natural wood, with matching railings and lighting.
How the project runs
- 1Site visit & measurements
- 23D concept and material samples
- 3Permits & engineering
- 4Framing & decking
- 5Railings, lighting & walkthrough
02 — Typically 3–7 days on site
Deck Resurfacing
If the framing is still solid, resurfacing replaces worn decking and railings with low-maintenance materials — a brand-new look for less than a full rebuild.
Frame inspection first
We check every joist and connection and repair what needs it before new boards go down.
Upgrade to composite
Swap splintering wood for boards that don't need staining.
Faster than rebuilding
Less demolition and a shorter project timeline.
How the project runs
- 1Frame inspection
- 2Old surface removal
- 3Frame repairs & joist protection
- 4New decking & railings
- 5Final walkthrough
03 — Typically 2–4 days, weather permitting
Deck Refinishing
A deep clean, sanding, board repairs and a quality stain or sealer bring tired wood back to life and protect it from the next few seasons of weather.
Restores natural wood
Removes grey weathering, mildew and old peeling finish.
Protects against moisture
Fresh sealer helps resist water, UV and foot traffic.
Three finish levels
Transparent, semi-transparent or solid colors to match your home.
How the project runs
- 1Wash & strip
- 2Sand & repair boards
- 3Color selection
- 4Two-coat stain or sealer
- 5Cure & walkthrough
04 — Typically 1–2 weeks on site
Pergolas & Covered Structures
Open-beam pergolas, solid-roof pavilions and covered porches extend the season and give a deck or patio the feel of a real outdoor room.
Shade where you need it
Beam spacing, louvers or a solid roof — tuned to your sun exposure.
Matches your home
Rooflines, trim and colors designed to look original to the house.
Ready for lights & fans
Planned for lighting, ceiling fans and heaters from the start.
How the project runs
- 1Design & structural plan
- 2Permits
- 3Footings & posts
- 4Beams, rafters or roof
- 5Finishes & electrical prep
05 — Typically 2–5 days on site
Fence Installation
Horizontal slat, traditional board, picket and glass-panel fencing — set on proper posts and finished to match your deck and home.
Privacy & safety
Heights and styles chosen for privacy, pets, pools and local rules.
Clean, straight lines
Properly set posts and consistent spacing that stay straight.
Coordinated design
Fencing that matches your deck, railings and home exterior.
How the project runs
- 1Property line review
- 2Style & height selection
- 3Post layout & setting
- 4Panels & gates
- 5Cleanup
06 — Typically 3–8 days on site
Patio Installation
Ground-level patios in pavers or natural stone — properly excavated and compacted so they stay level — often paired with a deck for multi-level living.
A solid base
Excavation, compacted aggregate and edge restraints for a level, lasting surface.
Flexible layouts
Curves, steps, fire-pit areas and seat walls.
Pairs with decks
Step down from a deck to a patio for distinct living zones.
How the project runs
- 1Layout & grading plan
- 2Excavation & base
- 3Pavers or stone
- 4Joint sand & edging
- 5Seal & walkthrough
Free design consultation
Not sure which service you need?
Many projects combine a few — a resurfaced deck with a new pergola, or a patio below a new deck. We'll help you plan it.